What Happened to the Benelli B76?

0
7


I love Italian handguns. When I say that, you likely picture a Beretta, probably the 92FS.

Yeah, these things…

While I do love that gun, and numerous others, today we are talking about a little-known handgun from another Italian company — the Benelli B76.

It may not be the iconic Beretta 92, but the B76 is a strikingly aesthetic pistol non the less. (Photo Credit: Maycotek)

Beretta owns Benelli now, but in 1976 they were still independent.

During that time, they produced and designed one of the most interesting handguns I’ve ever seen. If you asked me why I couldn’t give you a direct answer.

The B76 oozes with the stereotypical wild and complex designs we expect from high-end Italian products.

Table of Contents

Loading…

A Bit Different

It didn’t seem like they were trying to win military or police contracts, and the engineering behind the gun makes me want to say someone was showing off.

The B-Series from Benelli were over-engineering, elegant, and slick. (Photo: Billstclair.com)

The Benelli B76 isn’t traditional in any sense of the word. Rather it uses what’s best described as an inertia-delayed blowback system.

Inertia and Benelli go hand in hand. They revolutionized the market with their inertia-driven shotguns, so why not expand that to a pistol?

I’ve been reading the original manual, numerous websites, Gun Digest, and American Rifleman PDFs from the late 70s and early 80s, and I think I figured out how the gun works.

Ian McCollum of Forgotten Weapons dual-wielding Benelli pistols.

I have to give Ian at Forgotten Weapons a lot of credit as well.

He had a handgun in clear HD video to explain the process, which unlocked something in my brain. Let me try and explain it the best way I possibly can.

Inertia-Driven

When an automatic handgun fires, designers have to use some form of locked breech design or a blowback-operated gun with a spring heavy enough to reduce the velocity of the slide moving rearward to safe levels.

Slide Locked Back Glock 20
The vast majority of modern pistols utilize a tilting barrel to delay the locking action of the gun.

Blowback can be troublesome with calibers above .380 ACP due to the higher pressures. However, blowback allows for a fixed barrel which can aid in accuracy, albeit at the cost of increased recoil.

Most companies use some form of short recoil to create a locked breech, typically with a tilting barrel. You want the breech to remain locked until the pressure drops to a safe level to cycle and the bullet has left the barrel.

You can see how even with the slide removed, many of the major functional parts of the B76 remain on the frame. (Photo Credit: Maycotek)

Using an inertia-delayed system is another way to achieve this.

First, you have to understand that the B76 doesn’t utilize a traditional slide design. The slide is just that, the slide.

The bolt, firing pin, barrel, and recoil spring are all left on the frame when you remove the slide. Inside, the bolt sits in a locking recess and cannot move until it makes a slight jump out of the recess and onto its rails.

When disassembled, the uniqueness of the B76 is immediately apparent. (Photo: Forgotten Weapons)

When you fire the gun, there is rearward force created by recoil and by the pressure of the projectile leaving the gun.

The bolt gets hit with this pressure and wants to move, but inertia keeps the slide in place with a little help from the recoil spring.

The rear of the bolt has a little lever, which presses against a locking block. This locks the bolt in place until the pressure overcomes the inertia. By the time this happens, the pressure has dropped to safe enough levels.

A cutaway rendering of the Benelli B76, as seen in the video game World of Guns.

At this point, the bolt moves rearward, and a protrusion on the bolt meets a slot inside the slide and carries the slide rearward with the bolt. This completes your cycle of operations and extracts, ejects, loads, and recocks the weapon.

Everything Else

Apart from the odd operating system, the B76 was a fairly standard gun for the time.

It used a double-action, single-action design and came in numerous calibers and configurations. The standard B76 had a 4.25-inch barrel, and the Sport and Bullseye variants featured 5-inch barrels and available match weights.

Locking system aside, the controls and layout of the B76 are pretty standard. Nothing fancy here. (Photo: Cal Guns)

The magazines were single-stack designs, and most held eight rounds. The Bullseye model held five, as was the standard for many bullseye pistols of the era.

These were fascinating guns from a well-respected manufacturer, so why don’t we hear much about them today? Why doesn’t Benelli still make inertia-operated handguns?

Where Did It Go?

The gun was moderately successful. Its fixed barrel proved quite accurate, which lent it more popularity amongst competition shooters. This was reflected in the available Sport and Bullseye models of the gun.

A B76 sport shown with enlarged target grips and match barrel weight. (Photo: Patriot-Renegade)

Police and military contracts often help a gun find massive success, and admittedly the B76 didn’t score any of these contracts. The inertia system proved to be too ammo-picky for any widespread adoption.

Inertia shotguns tend to be ammo-sensitive, and the B76 is also best described as similarly finicky. In the gun’s manual, Benelli suggests using ammo with a velocity of at least 1,320 feet per second.

.45 ACP Ball vs Hollowpoint
As with many older guns, the B76 struggled to feed hollowpoints which were not as common during that era. Unfortunately, it also struggled to feed the more common soft point ammunition, which was the go-to for many people seeking self-defense ammo.

In a review by American Rifleman in 1979, the reviewer states that the gun fed hardball ammunition fine, but soft points and hollow points were unreliable.

Shooters also needed to ensure they had a good, firm, high grip on the gun. If limp-wristed or held too low, it could induce malfunctions. Benelli shotguns require a similar grip and press against the shoulder to function properly.

benelli 3gun m2
The Benelli M2 is a popular shotgun for competition but requires good form. The more forgiving gas-operated Benelli M4 was selected for military usage instead due to the temperamental nature of inertia-driven guns.

In the end, the inertia delay didn’t offer enough benefits over more conventional operating systems. In fact, it came with some serious disadvantages.

Additionally, the B76 was pretty expensive, retailing for $349.95, according to Gun Digest 1982. When adjusted for inflation, that’s over a grand today.

Over a grand, and you still just get a styrofoam box? At least take me out to dinner first. (Photo: Guns America)

Final Thoughts

Expensive, finicky guns rarely become mainstream. Guns like the H&K P7, Steyr GB, and Laugo Arms Alien are remarkable engineering feats that eventually end up in collections and museums rather than range bangs or holsters.

A trio of Benelli B76 pistols and a direct-blowback Benelli B77 in .32 ACP (bottom right). (Photo: Lifesizepotato)

The B76 was dang sure neat with a fascinating and novel operating system. However, it was not enough to guarantee its success, and like so many other interesting firearms, it faded into history.

What are your thoughts on the inertia-driven B76? Share your thoughts below! Interested in other odd operating systems? Check out our article on What Happened to the Remington R51!



Source link

LEAVE A REPLY

Please enter your comment!
Please enter your name here